Be Quiet! System Power 10 - 650W - 80plus bronze
System Power 10
650WProven reliability, silent operation
The System Power 10 650 W is intended for price -oriented assemblers who do not wish to give up reliability and silence. Its perfected characteristics, such as its thermo-controlled fan or its very low consumption in standby, underline the quality of this supply in the entry-level segment.
- Thermo-controlled 120 mm fan and optimized for silent operation
- Excellent stability of tensions thanks to its solid 12 V rail
- Strict regulation of voltages thanks to DC to DC technology
- Reliable operation which guarantees the support of powerful graphics cards
- Consumption less than 0.15 W in standby mode
- 80 Plus certification® Bronze (up to 88.5 %)
- Elegant black flat cables
- Complete safety panel
- 5 -year manufacturer's warranty
General informations
| Model | System Power 10 650W |
| Continuous power (W) | 650 |
| Crete power (W) | - |
| Aspect | Version 2.52 |
| EPS 12V standard | Version 2.92 |
| Topology | DC/DC |
| Digitally controlled | - |
| Tension (vac) | 200 - 240 |
| Frequency (Hz) | 50 |
| Input current (A) | 5 |
| Value of the power factor at 100% load | >0.95 |
| Modern Standby | ✓ |
| Consumption in standby | <0.15 |
| Average lifespan (h / 25 ° C) | > 100,000 |
| Operating temperature until | 40 |
Infographics
Yield
| Certification 80 plus | Bronze |
| Yield (%) at 230V, 2% load | - |
| Yield (%) to 230V, 10% load | - |
| Yield (%) to 230V, 20% load | 88.0 |
| Yield (%) to 230V, 50% load | 88.5 |
| Yield (%) at 230V, 100% load | 85.6 |
Cooling fan /
| Fan | Temperature-Controlled Quality Fan |
| Fan size (mm) | 120 |
| Bearing Technology | Sleeve |
| Engine technology | 4-pole Fan Motor |
| Maximum fan speed | 2100 |
| DB (A) at 10% load | - |
| DB (A) at 20% load | 8.9 |
| DB (A) at 50% load | 11.2 |
| DB (A) 100% load | 30.7 |
Output
| 12V rails (multi-rail operation) | 1 |
| 12v mono-rail operation | - |
| Overclocking key | - |
| +3.3V (A) | 20 |
| +5V (A) | 20 |
| +12V1 (A) | 54.17 |
| +12V2 (A) | - |
| +12V3 (A) | - |
| +12V4 (A) | - |
| +12V5 (A) | - |
| +12v6 (a) | - |
| -12v (a) | 0.3 |
| +5VSB (A) | 3 |
| Maximum combined power 12V (W) | 650 |
| Maximum combined power 3.3V + 5V (W) | 120 |
| Holding duration @ 100% (MS) | 17 (@75%) |
| Power Good Signal (MS) | 100 - 150 |
Cables and connectors
| Modular Cables | - |
| Wounded cables | ✓ |
| Flat cables | ✓ |
| Maximum length of cables (cm) | 79 |
| Cable length to the graphics card (cm) | 55 |
| Number of cables | 7 |
| Cable Atx Master map (20+4 PIN) | 1 |
| P4+4 (CPU) | 1 |
| P8 (CPU) | - |
| P4 (CPU) | 1 |
| 12VHPWR CABLE / W | - |
| PCI-E 6+2-PIN (Gpu) | 2 |
| PCI-E 6-PIN (Gpu) | - |
| Sata | 6 |
| Pata | 1 |
| Fdd (Discount) | - |
Security
| OTP (Protection against temperature peaks) | ✓ |
| OCP (protection against overcurrents) | ✓ |
| Opposite (protection against overloads) | ✓ |
| SCP (Protection against short circuits) | ✓ |
| OVP (protection against overvoltage) | ✓ |
| UVP (protection against tension reductions) | ✓ |
| Sip (Protection in the event of overvoltage of the network and against an overly high call current) | ✓ |
Safety standards
| Bsmi | - |
| CB | ✓ |
| CCC | - |
| THIS | ✓ |
| raw | - |
| ctuvus | - |
| Cu | ✓ |
| FCC |
