Be Quiet! Dark Power 13 ATX 3.0 - 1000w - 80Plus Titanium
Dark Power 13
1000WNo compromise on silence and performance
The Dark Power 13 1000 W of Be Quiet! guarantees a certified 80 more yield® Titanium, an almost inaudible operation and compliance with the ATX 3.0 standard, in accordance with the needs of new generation graphics cards.
- Yield 80 plus titanium (up to 95.2 %)
- ATX 3.0 power supply entirely compatible with PCIe 5.0 graphics cards and those equipped with 6+2 PIN connectors
- Silent Wings fan without improved frame for practically inaudible operation
- Mesh ventilation grid with funnel -shaped air inlet for better air circulation
- The overclocking key allows you to choose between 4 12 V rails and a single solid rail
12 V - Active technology rectify + Full Bridge LLC provides unrivaled signal stability and extremely high energy efficiency
- Modular cable management for maximum comfort
- 10 years of manufacturer's warranty
General informations
| Model | Dark Power 13 1000W |
| Continuous power (W) | 1000 |
| Crete power (W) | 1100 |
| Aspect | Version 3.0 |
| EPS 12V standard | Version 2.92 |
| Topology | Active rectify + Full Bridge + LLC + Sr + DC/DC |
| Digitally controlled | - |
| Tension (vac) | 100 - 240 |
| Frequency (Hz) | 50 - 60 |
| Input current (A) | 13 / 6 |
| Value of the power factor at 100% load | >0.98 |
| Modern Standby | ✓ |
| Consumption in standby | <0.13 |
| Average lifespan (h / 25 ° C) | >100,000 |
| Operating temperature until | 40 |
Infographics
Yield
| Certification 80 plus | Titanium |
| Yield (%) at 230V, 2% load | 72.0 |
| Yield (%) to 230V, 10% load | 90.7 |
| Yield (%) to 230V, 20% load | 94.8 |
| Yield (%) to 230V, 50% load | 95.2 |
| Yield (%) at 230V, 100% load | 93.3 |
Cooling fan /
| Fan | Silent Wings |
| Fan size (mm) | 135 |
| Bearing Technology | FDB |
| Engine technology | 6-Pole Fan Motor |
| Maximum fan speed | 1800 |
| DB (A) at 10% load | 8.1 |
| DB (A) at 20% load | 8.1 |
| DB (A) at 50% load | 8.6 |
| DB (A) 100% load | 25.8 |
Output
| 12V rails (multi-rail operation) | 4 |
| 12v mono-rail operation | ✓ |
| Overclocking key | ✓ |
| +3.3V (A) | 25 |
| +5V (A) | 25 |
| +12V1 (A) | 32 |
| +12V2 (A) | 32 |
| +12V3 (A) | 40 |
| +12V4 (A) | 40 |
| +12V5 (A) | - |
| +12v6 (a) | - |
| -12v (a) | 0.5 |
| +5VSB (A) | 3 |
| Maximum combined power 12V (W) | 996 |
| Maximum combined power 3.3V + 5V (W) | 125 |
| Holding duration @ 100% (MS) | 23.2 |
| Power Good Signal (MS) | 100 - 150 |
Cables and connectors
| Modular Cables | ✓ |
| Wounded cables | ✓ |
| Flat cables | - |
| Maximum length of cables (cm) | 105 |
| Cable length to the graphics card (cm) | 60 |
| Number of cables | 12 |
| Cable Atx Master map (20+4 PIN) | 1 |
| P4+4 (CPU) | 1 |
| P8 (CPU) | 1 |
| P4 (CPU) | - |
| 12VHPWR CABLE / W | 1 / 600 |
| PCI-E 6+2-PIN (Gpu) | 4 |
| PCI-E 6-PIN (Gpu) | - |
| Sata | 13 |
| Pata | 3 |
| Fdd (Discount) | - |
Security
| OTP (Protection against temperature peaks) | ✓ |
| OCP (protection against overcurrents) | ✓ |
| Opposite (protection against overloads) | ✓ |
| SCP (Protection against short circuits) | ✓ |
| OVP (protection against overvoltage) | ✓ |
| UVP (protection against tension reductions) | ✓ |
| Sip (Protection in the event of overvoltage of the network and against an overly high call current) | ✓ |
Safety standards
| Bsmi | ✓ |
| CB | ✓ |
| CCC | - |
| THIS | ✓ |