Be Quiet! Dark Power Pro 13 ATX 3.0 1300W - 80Plus Titanium
Dark Power Pro 13
1300WTechnologies and peak performance
The Dark Power Pro 13 1300W guarantees a certified 80 more yield® Titanium, offers very first -rate performance and displays ATX 3.0 compliance which makes it compatible with new generation graphics cards.
- 80 Plus titanium certification (up to 94.4%)
- ATX 3.0 power supply entirely compatible with PCIe 5.0 graphics cards and those equipped with 6+2 PIN connectors
- Capable of managing very strong load variations
- Fully digital control (PFC, LLC, SR / 12 V) and “Full Bridge” topology for optimal regulation and a low ripple noise
- Silent Wings fan without improved frame for operations practically inaudible at an ordinary level of load
- Overclocking keys to switch from 6 12 V rails to a single massive 12 V rail
- Aluminum chassis and modular cables individually waged for a sublimated design
- 10 -year warranty
General informations
| Model | Dark Power Pro 13 1300W |
| Continuous power (W) | 1300 |
| Crete power (W) | 1400 |
| Appearance | Version 3.0 |
| EPS 12V standard | Version 2.92 |
| Topology | Full Bridge +LLC+Sr + DC/DC |
| Digital control | ✓ |
| Tension (vac) | 115 - 240 |
| Frequency (Hz) | 50 - 60 |
| Input current (A) | 15 / 9 |
| Value of the power factor at 100% load | >0.99 |
| Modern standby watch mode | ✓ |
| Consumption in standby | <0.06 |
| Average lifespan (h / 25 ° C) | >100,000 |
| Operating temperature until | 50 |
Infographics
Efficiency
| Certification 80 plus | Titanium |
| Yield (%) at 230V, 2% load | 73.1 |
| Yield (%) to 230V, 10% load | 91.6 |
| Yield (%) to 230V, 20% load | 93.6 |
| Yield (%) to 230V, 50% load | 94.4 |
| Yield (%) at 230V, 100% load | 92.8 |
Cooling fan and technology
| Fan | Silent Wings |
| Fan size (mm) | 135 |
| Type of rolling | FDB |
| Engine technology | 6-Pole Fan Motor |
| Maximum fan speed | 2400 |
| DB (A) at 10% load | 10.2 |
| DB (A) at 20% load | 10.2 |
| DB (A) at 50% load | 10.2 |
| DB (A) 100% load | 23.2 |
Output
| 12V rails (multi-rail operation) | 6 |
| 12v mono-rail operation | ✓ |
| Overclocking key | ✓ |
| +3.3V (A) | 25 |
| +5V (A) | 25 |
| +12V1 (A) | 35 |
| +12V2 (A) | 35 |
| +12V3 (A) | 40 |
| +12V4 (A) | 40 |
| +12V5 (A) | 55 |
| +12v6 (a) | 55 |
| -12v (a) | 0.5 |
| +5VSB (A) | 3.5 |
| Maximum combined power 12V (W) | 1300 |
| Maximum combined power 12VHPWR (W) | 800 |
| Maximum combined power 3.3V + 5V (W) | 150 |
| Holding duration @ 100% (MS) | 18 |
| Power Good Signal (MS) | 100-150 |
Cables and connectors
| Modular cables | ✓ |
| Wounded cables | ✓ |
| Flat cables | - |
| Maximum length of cables (cm) | 105 |
| Cable length to the graphics card (cm) | 60 |
| Number of cables | 16 |
| Cable Atx Master map (20+4 PIN) | 1 |
| P4+4 (CPU) | 1 |
| P8 (CPU) | 1 |
| P4 (CPU) | - |
| 12VHPWR cables | 2 |
| PCI-E 6+2-PIN (Gpu) | 6 |
| PCI-E 6-PIN (Gpu) | - |
| Sata | 16 |
| Pata | 5 |
| Fdd (Discount) | - |
Security
| OTP (Protection against temperature peaks) | ✓ |
| OCP (protection against overcurrents) | ✓ |
| Opposite (protection against overloads) | ✓ |
| SCP (Protection against short circuits) | ✓ |
| OVP (protection against overvoltage) | ✓ |
| UVP (protection against tension reductions) | ✓ |
| Sip (Protection in the event of overvoltage of the network and against an overly high call current) | ✓ |
Safety standards
| Bsmi | ✓ |
| CB | ✓ |
| CCC | ✓ |
